Product Category Filter

Electrical tape (or insulating tape) is a type of pressure-sensitive tape used to insulate electrical wires and other materials that conduct electricity.

Electricians generally use only black tape for insulation purposes. The other colors are used to indicate the voltage level and phase of the wire. (In fact, the colored tape is referred to as “phasing tape”.) This is done on large wire which is available only in black insulation. When wires are phased, a ring of tape is placed on each end near the termination so that the purpose of the wire is obvious. The following table(s) describe the use of electrical tape.

Tape colorUsage (U.S.)Usage (U.K.)Usage (International – new)
BlackInsulation
Low voltage, phase A
Insulation
Low voltage, neutral
Low voltage, phase B
RedLow voltage, phase BLow voltage, phase ASheath, 415 V 3 phase
BlueLow voltage, phase CLow voltage, phase CLow voltage, neutral
Sheath, 230 V
BrownHigh voltage, phase A Low voltage, phase A
OrangeHigh voltage, phase B Sheath, garden tools
YellowHigh voltage, phase CLow voltage, phase BSheath, 110 V site wiring
GreenEarth groundEarth 
Green with yellow stripeIsolated ground Earth
WhiteLow voltage, neutral  
GreyHigh voltage, neutral Low voltage, phase C
SPECIFICATION:-
Sr No Particulars Specification
1 Product General Purpose Electrical Tape
2 Backing Soft P.V.C
3 Thickness 0.125 mm
4 Tensile Strength 2.5/14 PSTC – 31 Cm/Kg/Ib/In
5 Ellongation at Break 150% PSTC – 31
6 Adhesive Power 18Kg/CM/oz/In PSTC – 1
7 Dielectric Breakdown 6500 Volts ASTM D – 1000
8 Dielectrics Strenght 1250 Volt ASTM D – 1000
9 Colours Red, Yellow, Blue, Green, Black and White
10 Length 7 & 18 Metres
11 Widht 11mm, 15mm, 18mm, 22mm, 24mm, 33mm, 36mm, 48mm, 50mm, 60mm, 75mm
12 Store in Cool and Dark Place
13 KEEP AWAY FORM DIRECT SUNLIGHT
Note:- Standard Width is 11mm, 15mm and 18mm.